New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Woodland Hills pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Windows & Doors in Sherman Oaks, CA | Hale Windows Woodland Hills
We provide independent Mr-Glass windows & doors service throughout Sherman Oaks, from Sherman Oaks Window Repair on original aluminum sliders to full insert replacements in mid-century ranches. The thing that makes our Mr-Glass work here different is simple: we actually re-shim warped hillside frames on a weekly basis, because Sherman Oaks homes settle in ways flatland houses never do. Call (831) 618-2053 to get a written quote before anyone touches your windows.
We’re a local crew, not a manufacturer hotline. That means we diagnose what’s actually happening inside your existing Mr-Glass frames rather than reading from a corporate script. Sherman Oaks has its own set of window problems, and we’ve spent years learning how to solve them properly.
Why Sherman Oaks Residents Choose Us for Mr-Glass Service
Most Mr-Glass units in Sherman Oaks were installed decades ago, and the homes they sit in have shifted since. Spencer Odell, our owner, grew up in Los Angeles and trained in building construction technology at Los Angeles Trade-Technical College. He has spent close to two decades measuring, fitting, and finishing windows and doors across the San Fernando Valley. He will tell you straight whether your existing Mr-Glass sash is worth repairing or whether a new insert saves you more money than another patch job.
We know the Mr-Glass 7500, 7600, 7700, and 6800 Series units the way a mechanic knows a specific engine. That matters in Sherman Oaks, where original mid-century frames are frequently racked, warped, or simply worn past the point where off-the-shelf parts will seat correctly. We carry Mr-Glass-compatible OEM equivalent hardware and weatherstripping, and we’re honest when a sash is too far gone for cost-effective repair. You won’t get a sales pitch disguised as a service call.
We also do Mr-Glass sales & service the right way: written price first, background-checked technician at your door, and a 365-Day Done Right Promise on every job. If it’s not right, we make it right. No argument, no fine print.
Common Mr-Glass Windows & Doors Problems We Solve in Sherman Oaks
- Warped sashes on original Mr-Glass aluminum single hung windows. Decades of seismic settling in the Sherman Oaks hills rack frames out of square. The sash binds in the track, or it won’t stay up without a prop. We re-shim the jamb and replace the sash when needed.
- Failed seals and hazy glass in Mr-Glass dual-pane units. The inland valley heat plus Santa Ana thermal swings push sealed units through rapid expansion and contraction cycles. Once the desiccant inside the spacer is saturated, you get permanent fog. That’s a glass replacement, not a cleaning.
- Stripped locking mechanisms and worn rollers on Mr-Glass sliding doors. Wind-blown grit from fall Santa Ana events gets into roller tracks and chews up the nylon wheels. Doors grind, stick, or won’t lock. We replace rollers and locks with Mr-Glass-compatible parts.
- Loose or sagging Mr-Glass casement frames. Original nailing flanges on 1960s slab-built homes weren’t always shimmed properly. We pull the flange, level the jamb, and re-fasten so the sash seats tight against the weatherstripping.
- Dust infiltration during Santa Ana winds. A poorly sealed Mr-Glass frame lets wind-driven dust into the house. We track down the gap, replace worn weatherstripping, and seal the rough opening so you’re not dusting for a week after every wind event.
Mr-Glass Service in Sherman Oaks: What Local Conditions Mean for Your Equipment
South of Ventura Boulevard in the Sherman Oaks hills, many original mid-century homes still have their Mr-Glass single-pane, steel-framed casements and narrow sliders. They look the part for a classic 1950s ranch, but they leak air like a screen door and most have warped by a quarter-inch or more from decades of seismic settling. Retrofit installation here is a precise shimming art. You can’t just drop a new unit into an opening that’s racked 3/8 inch out of square and expect it to operate. The frame has to be pulled, the jamb re-shimmed with tapered cedar wedges, and the new sash installed so the reveal is consistent all the way around. Most general contractors won’t touch that level of correction, which is why so many hillside Sherman Oaks homes still struggle with windows that won’t latch or doors that jam after every minor earthquake.
One job stands out. On a hillside home off Sepulveda Pass, our tech found a Mr-Glass 6800 Series casement that would not latch. The entire frame had racked over 3/8 inch since the 1970s. We pulled the original nailing flange, re-shimmed the jamb using custom cedar wedges, replaced the warped sash with a new Mr-Glass-compatible insert, and restored a clean air seal. The homeowner noticed within a week that dust stopped piling up on the sill during Santa Ana winds.
Mr-Glass Models & Products We Service in Sherman Oaks
We work on the Mr-Glass 7500 Series Single Hung, 7600 Series Double Hung, 7700 Series Horizontal Sliding, and 6800 Series Casement. Most Sherman Oaks homes built between the 1940s and 1970s have at least one of these units still in service. Our parts approach is straightforward: we use Mr-Glass-compatible OEM equivalent hardware and weatherstripping whenever it’s available, because it seats correctly and wears at the same rate as the original. For sashes that are too far gone, we install Window Replacement - Sherman Oaks with energy-efficient insert windows. A new insert with low-E glass (a thin coating that blocks heat while letting light through) often outperforms an original single-pane steel unit by a wide margin, and it drops into the existing frame without tearing out stucco.
We stock the most common rollers, locks, balances, and weatherstripping profiles for Mr-Glass units locally, which keeps turnaround fast for Sherman Oaks jobs. Specialty hardware still comes from our suppliers, but we know exactly what to order.
Mr-Glass Service Pricing in Sherman Oaks
Here’s what Mr-Glass service typically costs in Sherman Oaks. A basic roller replacement on a sliding door runs $120 to $200 per panel. Replacing a failed dual-pane glass unit runs $250 to $500 per sash depending on size and whether it’s low-E. Weatherstripping and seal work on a single window runs $80 to $150. A full insert window replacement for a Mr-Glass 7500 or 7600 unit runs $650 to $1,100 per opening including the insert, installation, and trim work. Casement and sliding door inserts run higher, $900 to $1,600 per unit, because of the larger glass area and hardware.
What drives the price: the condition of the existing frame, whether we’re working on a slider versus a hung window, and whether the opening has settled out of square enough to require re-shimming. Every estimate includes a written, line-item price before any work starts. You’ll know the number before we pick up a tool. Call (831) 618-2053 to schedule a free estimate, and we’ll give you an exact quote for your Sherman Oaks home.
Serving Sherman Oaks, CA - Our Local Coverage Area
We’re based in the Sherman Oaks area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Windows & Doors in Sherman Oaks
It depends on the frame. If the steel frame is still square and the rust is limited to surface patina, we can often restore operation with new hardware and weatherstripping. But if the frame has racked from seismic settling, or the steel is rusted through at the corners, repair becomes a losing game. We’ll tell you which camp you’re in during the free estimate, and we’ll show you the frame with the trim off so you can see for yourself. Call (831) 618-2053 to schedule that visit.
They hold up as well as any aluminum-framed slider when the rollers and weatherstripping are in good condition. The problem is that most Mr-Glass sliders in Sherman Oaks haven’t had their rollers replaced in 20 years. Worn rollers let the panel sag, which opens a gap at the top and lets wind-driven dust and rain inside. We rebuild the roller assemblies, re-level the panel, and replace the pile weatherstripping. A properly maintained Mr-Glass slider seals tight even in a Santa Ana blow.
Fog between the panes means the sealed unit has failed. The spacer has lost its bond and moisture has entered the air gap. You can’t replace the seal on a dual-pane unit; you replace the glass pack. On a Mr-Glass 7600 Series Double Hung, that’s usually a $250 to $500 repair per sash depending on size and glass type. We can match the original tint and grid pattern so the new pack blends with the rest of the house. Call (831) 618-2053 for a written quote on your specific units.
Yes. We work with Sherman Oaks HOAs that require replacement windows to match the original mid-century profile, including custom wood-clad or fiberglass units that mimic the original steel-frame look. The Mr-Glass 6800 Series casement is often the closest match for original steel casements, and we can order it in custom sizes through our insert replacement process. Send us the HOA requirements and we’ll spec the unit to meet them.
We re-shim. When a home has settled, the rough openings are usually out of square, and a new window installed without correction will bind, leak air, and wear its hardware prematurely. We pull the original flange, check the opening with a level and laser, and re-shim with tapered cedar wedges so the new unit sits true. It’s slower work, but it’s the only way a window actually performs for the next 20 years. Call (831) 618-2053 and we’ll assess your openings during the free estimate.
Service Areas Near Sherman Oaks
We serve Sherman Oaks and the surrounding San Fernando Valley communities. If you’re in Woodland Hills, Tarzana, Calabasas, Winnetka, or Oak Park, we can help with Mr-Glass windows and doors there too. Our Sherman Oaks coverage is part of our broader Sherman Oaks service area.
Book Your Mr-Glass Service in Sherman Oaks Today
Call (831) 618-2053 to schedule your free estimate. We’ll send a background-checked, photo-badged technician to your Sherman Oaks home, put the price in writing before any work starts, and stand behind the job with our 365-Day Done Right Promise. A window is only as good as the install behind it.
Written by Spencer Odell, Owner at Hale Windows Woodland Hills, serving Sherman Oaks and the San Fernando Valley since 2009.
Six Reasons Homeowners Choose Hale Windows Woodland Hills
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.