New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Woodland Hills pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CWS Window Replacement: The Woodland Hills Owner’s Guide
If you have a CWS window that’s fogged, cracked, or simply won’t seal right anymore, we replace it. Most CWS window replacements in Woodland Hills run between $450 and $1,400 per window installed, depending on glass package and frame condition. We keep common CWS replacement parts stocked on our trucks, and in many cases we can complete the swap the day we arrive.
The way most Woodland Hills homeowners find out a CWS window has failed is subtle at first. You notice condensation between the panes that never goes away, even on dry days. Or the sash feels heavier than it used to, and closing it takes real effort. The seal has broken, or the balance system is shot. Left alone, that window stops doing its job entirely, and your AC bill in a Valley August starts reflecting it.
Key Takeaways:
- CWS window replacement in Woodland Hills typically costs $450 – $1,400 installed
- We’re an independent service provider, not affiliated with CWS, but we stock CWS-compatible parts and know these windows well
- Most CWS replacements are done in one visit, same day when parts are on the truck
- Every quote is written before work starts, and every job carries the 365-Day Done Right Promise
Which CWS Models This Applies To
CWS window lines vary by era, and that matters for replacement parts. The older CWS single-hung and horizontal slider units from the early 2000s use different balance assemblies and shoe sizes than the newer double-hung models. If your home was built or renovated in Woodland Hills between roughly 1995 and 2015, there’s a good chance you’re looking at one of those earlier generations.
Identifying your exact CWS model is easier than most people expect. Look for a label on the top or side edge of the sash itself. You’ll typically find a series code like 1000, 2000, or 3000 stamped there. Also measure the visible glass width and height, and the overall frame depth. Those two numbers, plus the series code, tell us exactly which replacement components fit your window. If the label is worn off, we can usually narrow it down from the hardware style and the shape of the weep holes in the frame.
One compatibility gotcha we see often: CWS changed its balance shoe design between series generations. A balance that fits a 2000 series will not seat correctly in a 1000 series frame, even if it looks close. Forcing it cracks the shoe and ruins the new part. This is exactly the kind of thing that makes CWS window replacement worth doing with someone who’s handled these units dozens of times, not once or twice. On the OEM-versus-aftermarket question, we’re straightforward with homeowners: for CWS glass packs and balances, quality aftermarket equivalents from reputable manufacturers perform just as well and cost 20 – 30% less than OEM CWS-branded parts. For locking hardware and pivot bars, we recommend staying with CWS original components because the tolerances are tighter and aftermarket copies tend to wobble after a few months.
Signs Your CWS Window Replacement Is Failing
- Fogging or haze between the panes. The seal around the insulated glass unit (IGU) has failed, letting moisture in. Once that happens, the argon gas escapes and the low-E coating (a thin layer that blocks heat while letting light through) starts to degrade. Glass replacement is the only real fix.
- Sash drops when you raise it. The balance system, either a spiral or block-and-tackle style depending on the CWS series, has lost tension or snapped. A window that slams shut on its own is a finger hazard for kids and a sign the balances need replacing now.
- Hard cranking or sticking on an awning or casement window. The operator gear teeth are stripping, usually after years of grit working its way into the mechanism. Replacing the operator now is a $90 to $200 fix; waiting until it seizes means replacing the whole sash and possibly the frame track.
- You can feel a draft even when the window is closed and locked. The weatherstripping has compressed beyond usefulness, or the frame has warped slightly from years of Woodland Hills heat cycling. If the frame itself has shifted, a full window replacement is often smarter than chasing a seal fix that won’t hold.
- Visible cracks in the glass, even small ones. Cracks from impact or thermal stress will spread, and a cracked pane loses its structural integrity. Here’s a reality of California weather: our big temperature swings between cool nights and 100-degree afternoons accelerate stress cracks. A window that would survive years in a milder climate will fail faster here.
Replacement Cost & What’s Included
For CWS window replacement in Woodland Hills, here’s the honest math. A single IGU glass pack replacement runs $450 to $700 installed for most standard sizes. A full sash replacement, when the frame is still sound but the sash itself is failing, lands between $600 and $900. A full-frame replacement, needed when the frame is warped or the rough opening needs flashing work, runs $1,100 to $1,400 and up depending on size and access.
| Replacement Type | Typical Installed Cost | When It’s the Right Call |
|---|---|---|
| IGU glass pack only | $450 – $700 | Fogged or cracked glass, frame still square |
| Sash replacement | $600 – $900 | Hardware or balances failed, frame intact |
| Full-frame replacement | $1,100 – $1,400+ | Warped frame, water damage, or upgrade to modern glass package |
Every CWS window replacement we do includes the part, labor, disposal of the old unit, and a written guarantee on the work. If a repair fails, our second visit is free. You get the price in writing before we start, and that price does not change once work begins. We don’t do change orders on window replacements.
DIY or Call Us?
What you can safely do yourself: clean the tracks, check for obvious obstructions, and note the series code on the label so you can describe your window accurately on the phone. That’s genuinely useful and saves a trip. What you should not do yourself: remove a CWS sash with a failed balance system, and never attempt to replace an IGU glass pack at home. Window glass is heavy, and the CWS balance mechanisms are under tension. When a balance lets go unexpectedly, the sash can drop hard enough to break fingers or shatter glass in your hands. Spencer Odell has pulled more than one DIY-disassembled window out of a Woodland Hills home where the homeowner had the best intentions and the worst outcome. A window is only as good as the install behind it, and that includes the disassembly. If you’re not certain, call (831) 618-2053. The estimate is free and so is the advice.
FAQs
A CWS window installed correctly should last 20 to 30 years before the seals and balances need serious work. In Woodland Hills, expect the seals to go first, usually around the 15-year mark, because the heat and UV exposure break down the glazing compounds faster than in coastal climates. If your CWS units are fogging at 10 years, the original install was likely the problem, not the window.
No. Once moisture is between the panes, the seal has failed and the insulating gas is gone. Defogging services are a temporary cosmetic fix that does not restore the seal or the low-E performance. Glass pack replacement is the only real solution. Call (831) 618-2053 and we’ll tell you exactly what your window needs.
Most single-window CWS replacements, glass pack or full sash, take 45 minutes to two hours once we’re on site. If we’re replacing multiple windows, we typically finish a whole job in one day. We’ll give you a written timeline with your quote so you know what to expect.
We stock common CWS replacement parts, including glass packs in standard sizes, balance systems, and locking hardware, on our trucks and in our Woodland Hills inventory. Non-standard or custom-size glass packs may take 5 to 10 business days. We also service and stock parts for PGT, CGI, and ES Windows units, so if you have a mixed-brand home, we can handle the whole list in one visit. Call (831) 618-2053 for a free estimate.
Written by Spencer Odell, Owner, Hale Windows Woodland Hills at Hale Windows Woodland Hills, serving Woodland Hills and nearby areas.
Six Reasons Homeowners Choose Hale Windows Woodland Hills
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.