New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Woodland Hills pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ES Windows Window Installation: The Woodland Hills Owner’s Guide
ES Windows window installation in Woodland Hills typically runs $85 to $160 per window opening for the install labor when replacing an existing unit, with full-frame replacements on ES Windows’ larger fixed and casement lines landing between $400 and $900 per window depending on size, finish, and whether the existing frame needs repair before the new unit goes in. Most Woodland Hills homeowners call us after noticing air moving around the sash, condensation trapped between the glass panes, or a window that suddenly takes two hands to open. We stock ES Windows-compatible parts on our trucks and can usually complete the swap the same visit.
Here’s the reality we see on streets off Topanga Canyon Boulevard and throughout Woodland Hills: ES Windows builds a solid aluminum frame, but the install is what determines whether that frame stays square, seals tight, and slides smooth for fifteen years or starts fighting you in five. That’s what this page is about. If you own ES Windows and something is wrong, here’s exactly what you’re dealing with, what it costs, and who to call.
Key Takeaways
- We install and service ES Windows in Woodland Hills, and we’re an independent service provider, not affiliated with ES Windows corporate.
- Typical installed replacement ranges from $85 to $900 per window depending on scope, size, and frame condition.
- We carry ES Windows-compatible rollers, balances, weatherstripping, and locking hardware on the truck.
- Every job gets a written price before any work starts, backed by our 365-Day Done Right Promise.
- Call (831) 618-2053 for a free estimate. A live person answers, 24/7.
Which ES Windows Models This Applies To
ES Windows produces aluminum-frame windows in single-hung, horizontal slider, casement, and fixed picture configurations, along with some awning styles. We service all of them across Woodland Hills. The parts that fail most often differ by series. Their horizontal sliders, common in mid-century ranch homes south of Ventura Boulevard, wear out roller assemblies at the bottom track. Their casement windows, more common in newer builds around Warner Center, tend to develop operator crank issues and sagging hinge sets. Single-hungs, found block after block in neighborhoods like Walnut Acres, eat balance springs and shoe guides over time.
Identifying your ES Windows model matters because the roller size, balance length, and hinge throw vary between series. Look for a small white or silver tag on the inside of the frame, usually near the top or bottom corner of the sash. It will list a series number like ES-3000, ES-5000, or ES-7000. If the tag is gone, we measure the sash height, the roller wheel diameter, and the track profile on site. As for OEM versus aftermarket, ES Windows-branded parts are thinner on the ground than they used to be, and some dealers in the San Fernando Valley quote six-to-eight-week lead times. We carry a mix: OEM ES parts when available and quality aftermarket equivalents machined to match the original tolerances. Spencer Odell has pulled enough ES frames apart to tell you which aftermarket roller will bind in a year and which one will run quiet for a decade. We won’t sell you the first one.
Signs Your ES Windows Window Installation Is Failing
- Sticking or grinding when you slide or crank it open. This is almost always a worn roller, a stripped operator gear, or a balance losing tension. On sliders, you may also find visible wear grooves in the aluminum track, which means the track and the roller should be addressed together.
- Air you can feel around the sash on windy days. The weatherstripping has compressed or hardened, a common issue in Woodland Hills because our dry summers and hot sun bake vinyl and rubber seals faster than coastal climates do. You may also see daylight at the corner joints.
- Condensation between the glass layers. That means the sealed unit has failed and inert gas has leaked out. The glass unit itself needs replacement, and on some ES series, the glazing bead makes this a straightforward swap without replacing the whole frame.
- The window does not lock or the lock feels mushy. ES Windows locking hardware is aluminum, and over years of use and thermal cycling, the strike plate or latch can wallow out. A loose lock is a security issue in a city where that matters, and it often means the sash is no longer sitting square in the frame.
- Visible water staining or soft drywall under the window after rain. This is rarely the window glass itself. It’s almost always failed perimeter flashing or sealant from the original Woodland Hills installation. We see this regularly on south-facing walls where Santa Ana winds drive rain hard against the stucco.
Replacement Cost & What’s Included
Here’s what you should expect to pay for ES Windows installation work in Woodland Hills:
| Scope of Work | Typical Range |
|---|---|
| Replace roller assembly or balance (single window) | $85 – $180 installed |
| Replace weatherstripping and seals (single window) | $95 – $220 installed |
| Replace operator crank and hinge set (casement) | $150 – $320 installed |
| Replace failed insulated glass unit (single pane area) | $250 – $550 installed |
| Full-frame window replacement (per opening, standard size) | $400 – $900 installed |
| Full-frame replacement, large fixed or custom ES unit | $700 – $1,400+ installed |
What moves the number: frame condition, access from outside (second-story work costs more), stucco repair around the opening, and whether we’re matching a discontinued ES finish. Every quote is written, line-itemed, and in your hands before we order parts or pick up a tool. There are no change orders waiting on the other side of the wall. The labor on every repair carries a written guarantee, and if a repair fails, the second visit is free. The whole job sits under our 365-Day Done Right Promise: if it’s not done right, we make it right. No argument needed.
DIY or Call Us?
If your ES Windows slider is sticking, you can safely remove the sash, clean the track, and clear out the gunk that builds up in Woodland Hills dust. That’s honest maintenance, and it fixes maybe a third of the sticking calls we get. But here’s where DIY goes wrong: aluminum ES frames are not forgiving. Forcing a sash with a seized roller bends the frame channel, and now you’re replacing a frame section instead of a $12 roller. Balances are under spring tension, and a released balance cable can take a chunk out of drywall or a finger. Casement operators are gear-driven, and the wrong replacement part will strip in weeks. If you have to force anything, or if the sash is off the track, stop and call us. The estimate is free, and you’ll know exactly what you’re paying before we start.
A window is only as good as the install behind it. That line gets said on a lot of Woodland Hills job sites, usually by Spencer Odell, right before he shows a homeowner what the last installer did wrong. Call (831) 618-2053 and we’ll send someone to look at your ES Windows. A live person answers, 24 hours a day, 7 days a week. No voicemail, no callback queue.
FAQs
You can expect 15 to 25 years from the aluminum frame, but the moving parts and seals wear much faster in our climate. We typically replace rollers, balances, and weatherstripping every 5 to 10 years on ES Windows in Woodland Hills, and insulating glass units often need replacement at the 12-to-15-year mark. Sun exposure and Santa Ana-driven dust shorten the seal and roller life compared to coastal neighborhoods. If your windows are nearing age 15, call (831) 618-2053 and we’ll tell you what’s still good and what needs attention. The estimate is free.
In most cases, yes. Rollers, balances, hardware, and weatherstripping are all repairable parts, and we replace insulating glass units without pulling the whole frame. Full replacement only makes sense when the frame is bent, heavily corroded, or the owner wants to upgrade to a different ES series or improved glass package. We’ll give you the straight answer either way. Call (831) 618-2053 and we’ll put options in writing.
Most parts-level repairs like roller, balance, or weatherstripping replacement take 30 to 60 minutes per window. A full-frame replacement on a standard sizing takes us about 2 to 4 hours per opening including stucco patching and interior trim work. Large fixed ES units or second-story work can take longer. We’ll confirm the timeline before work starts, in writing, with the price locked.
We stock common ES Windows-compatible rollers, balances, weatherstripping, and locking hardware on our trucks, covering the series we see most in Woodland Hills. Special-order items, including OEM ES parts, sometimes have lead times of two to six weeks depending on availability. We’ll tell you before you commit. If you need parts matched to your exact window, call (831) 618-2053. Spencer Odell will make sure the part fits before we take a dime.
Written by Spencer Odell, Owner, Hale Windows Woodland Hills at Hale Windows Woodland Hills, serving Woodland Hills and nearby areas.
Six Reasons Homeowners Choose Hale Windows Woodland Hills
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.