New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Woodland Hills pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Sliding & Patio Doors: The Woodland Hills Owner’s Guide
If you have a Mr-Glass sliding patio door in Woodland Hills and a roller, lock, handle, or track has failed, we stock the replacement parts and install them, typically the same visit. A full Mr-Glass patio door roller replacement in Woodland Hills runs $180 to $340 installed; a complete handle-and-lock set runs $140 to $260 installed, parts and labor included. Most Woodland Hills homeowners discover the problem the same way: the door suddenly drags, sticks halfway, or stops locking flush against the jamb. Spencer Odell has pulled enough failed Mr-Glass rollers out of tracks along Topanga Canyon Boulevard to know the usual culprit is a worn bearing that has been grinding aluminum against steel for months, not the track itself.
Key takeaways:
- We stock Mr-Glass-compatible rollers, handles, locks, and track hardware on the truck for most Woodland Hills service calls.
- Installed pricing is written down before we touch the door, no change orders.
- Every repair carries a written guarantee; if the repair fails, the second visit from Hale Windows Woodland Hills is free.
- We are an independent service provider, not affiliated with Mr-Glass. We service their doors because we know the hardware intimately.
Which Mr-Glass Models This Applies To
Mr-Glass patio doors in Woodland Hills homes generally fall into two families: the aluminum-framed sliding doors common in 1980s and 1990s construction, and the newer vinyl-framed sliders installed over the last 15 years. The aluminum frames use adjustable steel rollers with a 1-1/4-inch diameter wheel; the vinyl frames take a narrower 7/8-inch roller with a stainless steel ball-bearing hub. If you measure the roller wheel itself, that diameter is your first compatibility check. If the label on the door edge has a serial number starting with “MG,” it is an older Mr-Glass aluminum series. We carry both OEM Mr-Glass parts and quality aftermarket equivalents. For door panels that are still square and rolling true, an aftermarket roller with a sealed bearing often outlasts the original. For handles and locks, we lean OEM because the screw-hole spacing and latch geometry on Mr-Glass doors is fussy. Mr-Glass and compatible parts are only one slice of what we work with; we also service PGT, CGI, and CWS patio doors, so matching hardware to the actual door in front of us is standard practice, never guesswork.
Signs Your Mr-Glass Sliding & Patio Door Is Failing
- The door drags or you have to lift it to move it. This is roller bearing wear. Once the bearing collapses, the wheel scrapes flat on one side and the door rides on the track edge instead of the wheel.
- The door stops locking flush. A common Mr-Glass issue where the latch hook no longer reaches the keeper because the roller height has sagged. Replacing the rollers usually restores the lock alignment without touching the lock itself.
- You hear a grinding or metal-on-metal scrape when sliding. That is the sound of a wheel that has stopped turning and is being dragged along the aluminum track. Continuing to slide it scores the track, which can turn a $200 roller job into a $500 track job.
- The handle flops or the thumb latch does not spring back. The internal spring or the entire handle cartridge has failed. Mr-Glass handles are not rebuildable in most cases; the fix is a replacement handle assembly.
- The door panel wobbles or drops on one side. On older aluminum frames, this can mean the roller bracket screws have stripped out of the frame. The fix is an oversized bracket or a track realignment, not just a new wheel.
Replacement Cost & What’s Included
In Woodland Hills, Mr-Glass patio door parts and labor range from about $140 for a single handle replacement up to $500 for a full roller, track, and alignment job on a badly worn door. The range comes down to three things: whether the track is salvageable, whether the door is aluminum or vinyl, and whether we are doing one roller or both. Every quote from Hale Windows Woodland Hills is a written price delivered before work begins, so the number on the invoice is the number you approved. The 365-Day Done Right Promise applies: if we repair a Mr-Glass door part and the fix is not right, we make it right at no charge. That includes a free second visit for any repair that fails within the written guarantee period.
| Mr-Glass Part | Typical Installed Price in Woodland Hills |
|---|---|
| Roller replacement (one door panel) | $180 – $340 |
| Handle and lock set | $140 – $260 |
| Track realignment or repair | $120 – $380 |
| Full roller, track, and alignment service | $300 – $500 |
Those prices include the part, labor, and cleanup. If we find the track needs replacement during the job, we stop, show you the issue, and put the new price in writing before proceeding. No surprises.
DIY or Call Us?
You can safely check a few things yourself before calling. Look at the track for grit and vacuum it out. Check whether the door has an adjustment screw on the bottom edge and try raising it. Listen for the grinding sound. What you should not do is pull the door panel off the track to replace a roller yourself. A sliding patio door panel can weigh 150 to 300 pounds depending on the glass. Without the right lifting gear and a second set of hands, that panel can come down hard and do serious damage to you or the glass. The tension and alignment work on a Mr-Glass door is also unforgiving: a roller height off by an eighth of an inch leaves the lock misaligned or the door binding. For the cost of the part and an hour of labor, a trained Hale Windows Woodland Hills technician with the right tools is the cheaper path. Call (831) 618-2053 and we will quote it before we start.
FAQs
A well-installed Mr-Glass sliding door frame should last 30 years or more, but the rollers are the wear item: in the San Fernando Valley heat and dust, expect rollers to need replacement every 8 to 12 years. Woodland Hills sun exposure on a west-facing door shortens that, because the heat breaks down the nylon in the wheels and dries out the bearing grease. Call (831) 618-2053 and we will tell you which part on your door is actually failing before recommending a replacement.
Generally no. The bearing inside the roller is not serviceable; once it is worn, the wheel is done. What is repairable is the rest of the door: a good technician can often restore a dragging door with new rollers and a track cleanup rather than a full door replacement. For an exact quote on your door, call (831) 618-2053.
Most roller and handle replacements are finished in 45 to 90 minutes. If the track is scored and needs realignment or repair, the job can extend to two hours. We will give you that time estimate up front, in writing, with the price.
Yes. Our trucks stock Mr-Glass-compatible rollers in both the 1-1/4-inch and 7/8-inch sizes, handle and lock sets, and track hardware. For uncommon Mr-Glass series or odd frame sizes, we can order the exact OEM part and schedule the install within a few days. Call (831) 618-2053 and we will confirm the part before we arrive.
Written by Spencer Odell, Owner, Hale Windows Woodland Hills at Hale Windows Woodland Hills, serving Woodland Hills and nearby areas.
Six Reasons Homeowners Choose Hale Windows Woodland Hills
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.