VLX 100 Pivot Door

VLX 100 Pivot Door in Woodland Hills, CA | Hale Windows Woodland Hills

The VLX 100 Pivot Door is a heavy-duty aluminum entry door that rotates on a vertical center axis instead of swinging on side hinges. That single design difference changes everything: the door can be wider than typical hinged doors, glass panels can be oversized, and the entry becomes an architectural statement rather than just a way in. Hale Windows Woodland Hills is an authorized ViewLux installation partner serving Woodland Hills, CA, which means we sell, measure, install, and service this door directly. No third-party handoff. If you’re researching the VLX 100 for a modern ranch in Woodland Hills or a hillside remodel off Mulholland, call us at (831) 618-2053 for straight answers and exact pricing.

Call (831) 618-2053

Product Overview – VLX 100 Pivot Door

The VLX 100 exists because standard hinged doors stop making sense beyond a certain width. A conventional side-hinged door pulls all its weight on two or three hinges secured to the jamb. Go too wide and the door sags, the hinges wear, and the reveal lines drift. A pivot door solves that by carrying the load on top and bottom pivot points set into the frame and floor. The weight distributes vertically, which is why the VLX 100 handles spans up to 60 inches wide and 120 inches tall without the droop you’d get from a wide hinged door.

The frame is aluminum with a 0.098-inch wall thickness and a 2.56-inch profile width. That’s a substantial section, and it’s why the VLX 100 holds large glass panels without flexing. ViewLux engineered the door for oversized lites, the kind that make a Woodland Hills entry feel open to the yard while still closing tight. The door suits contemporary homes with flat rooflines and clean stucco planes, but we’ve also installed the VLX 100 on mid-century homes in Woodland Hills where the original entry was narrow and dark. The pivot door changes the whole front elevation.

Why buyers choose the VLX 100 specifically over other pivot systems: the thermal break keeps the interior side of the frame from conducting heat, the hardware is rated for repeated daily use, and the door accepts laminated glass for impact resistance. For Woodland Hills homeowners, that last point matters. The Santa Ana winds plus hillside exposure mean a front door takes real wind load. A flimsy pivot system rattles in those conditions. The VLX 100 doesn’t.

Technical Specifications

Here are the VLX 100 specifications we quote from when sizing doors for Woodland Hills projects. These are the numbers our installers work from on every job.

• Frame wall thickness: 0.098 inches of extruded aluminum
• Profile width: 2.56 inches, visible frame face
• Maximum panel size: 60 inches wide by 120 inches tall
• Pivot mechanism: Vertical center-axis rotation, floor and header pivot points
• Glass options: Clear, Frosted, Obscure, Low-E, Tempered, Laminated
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Thermal performance: Thermally broken frame, NFRC-rated energy values
• Installation standard: AAMA 2400/2410 compliant installation by Hale Windows Woodland Hills
• Perimeter sealing: AAMA 812 low-expansion foam at all frame joints
• Glazing compliance: Tempered or laminated glass per California building code for door lites

Performance Features

Thermal Efficiency – The VLX 100 uses a thermal break between the exterior and interior aluminum extrusions. That break interrupts conductive heat transfer, so the inside face of the frame doesn’t turn cold on winter mornings or hot during Woodland Hills summers. NFRC-rated performance values are available for the glass packages we quote.

Acoustic Performance – The VLX 100 seals tighter than a conventional door, and that shows up in sound control. Homes near the 101 or along Ventura Boulevard deal with constant traffic noise. A laminated glass package in the VLX 100 cuts that noticeably versus a standard hinged door with an air gap around the perimeter. Sound ratings vary by glass selection, and we can walk you through the numbers.

Airtightness & Weather Seal – Air leakage is where most entry doors fail. The VLX 100 is built to close against a continuous perimeter gasket system, and our installers seal every joint with AAMA 812 low-expansion foam. No gaps at the threshold, no drafting at the pivot points. In a Woodland Hills home, that means stable indoor temperatures and lower HVAC load.

Waterproofing – We install the VLX 100 per AAMA 2400/2410, which covers the flashing, sill pan, and drainage details that keep water out. Winter rains in Woodland Hills are intense when they hit, and a pivot door with poor sill detailing will leak. The combination of the door’s engineering and our installation procedure keeps the opening dry.

Wind Resistance – The VLX 100 is wind-load rated, and for Woodland Hills hillside homes that rating isn’t optional. Santa Ana wind events push against large glass panels with real force. The 0.098-inch wall thickness and the top-and-bottom pivot anchoring hold the panel stable even when the wind hits broadside.

Security & Hardware – A pivot door needs a multi-point lock to feel solid when closed, and the VLX 100 hardware set engages along the full frame. The pivot blocks are fixed into the subfloor and header, not screwed into trim. Laminated glass adds a security layer that resists break-in attempts far longer than standard or tempered glass alone.

Color & Glass Options

The VLX 100 comes in six finishes. Premium Black is the most requested in Woodland Hills right now, especially on modern and transitional homes with black window frames. Anodized Silver reads more industrial and pairs well with concrete and steel details. Pure White suits homes with white trim packages, while Bronze and Champagne land somewhere between warm and architectural. Teak Wood is a specialty finish for homeowners who want the warmth of wood grain without maintaining an actual wood door. We keep finish samples in the Woodland Hills showroom, and we encourage you to look at them under daylight before deciding.

Glass selection depends on where the door faces and what you’re comfortable with. Clear glass opens the entry visually but exposes the interior to anyone at the door. Frosted or Obscure glass keeps privacy while still passing light. Low-E is the energy pick for west-facing entries that catch afternoon sun. Tempered is standard for safety glazing in doors per code. Laminated adds impact resistance and sound damping, and we recommend it for any Woodland Hills home facing significant wind exposure or street noise.

Installation by Hale Windows Woodland Hills in Woodland Hills

Pivot doors fail at installation more than any other point. A pivot door is heavier than a hinged door, it hangs differently, and the tolerances are tighter. If the subfloor isn’t flat or the header isn’t level, the panel will bind or drift. That’s why the manufacturer warranty is only as good as the installation behind it. ViewLux authorizes Hale Windows Woodland Hills to install the VLX 100 because our process is documented and consistent.

Every installation starts with a pre-install inspection. We check the rough opening dimensions, confirm the subfloor and header conditions, and verify that the pivot points have solid blocking to anchor into. On the install day, we set the frame level, plumb, and square before the panel goes in. Then we seal all perimeter joints with AAMA 812 low-expansion foam, install the sill pan per AAMA 2400/2410, and run a water test before we call the job done. The last step is cleanup. We haul away the old door, the packaging, and any debris.

Woodland Hills has its own considerations. Older homes in the flats often have rough openings that were framed for thin wooden doors, and the opening needs modification to take a 2.56-inch profile frame. Hillside homes face stronger wind exposure and sometimes have City of Los Angeles hillside review requirements for front elevations. We’ve handled enough Woodland Hills installs to know what triggers plan review and what doesn’t. If you’re replacing an entry on a Woodland Hills hillside property, call us at (831) 618-2053 before you finalize the door size so we can check what applies to your address.

Frequently Asked Questions – VLX 100 Pivot Door

What is the lead time for the VLX 100 Pivot Door?

In our experience, expect about 4 to 6 weeks from order to delivery for a standard-size VLX 100, and longer for custom finishes or oversized panels. ViewLux builds to order, and finish availability shifts throughout the year. When we quote a Woodland Hills project, we give you a written lead time at the time of deposit. Call (831) 618-2053 if you’re working against a move-in date.

Does the VLX 100 qualify for energy tax credits?

Possibly. Doors that meet the ENERGY STAR Most Efficient or applicable federal tax credit criteria for U-factor and SHGC can qualify for a federal tax credit, but it depends on the exact glass package you select. We can provide the NFRC values for your chosen configuration and let you check them against the current IRS requirements. We won’t promise a credit without the numbers backing it.

What warranty comes with the Pivot Door?

The VLX 100 carries a manufacturer warranty from ViewLux that covers the frame, glass, and hardware. The installation work by Hale Windows Woodland Hills is separately warranted by us. A pivot door installed by an unauthorized contractor can void the manufacturer coverage, which is one more reason to have us handle the full job from measurement to final inspection. We review warranty terms line by line with every Woodland Hills client.

Can I customize the size of the VLX 100?

Yes, within the structural limits of the system. The VLX 100 spans up to 60 inches wide and 120 inches tall. If your opening is smaller, the panel is simply built smaller. If your Woodland Hills entry calls for a wider panel than 60 inches, we’ll be honest with you about whether this system works or whether a different product fits better. We’d rather tell you no than sell you a door that won’t perform.

How do I maintain an aluminum pivot door frame?

Aluminum frames need very little. Wash the frame and glass with mild soap and water twice a year, keep the pivot points free of debris, and check the sweep at the bottom of the panel for wear. Don’t use abrasive cleaners on anodized or painted finishes. If the door ever feels stiff or the reveal lines drift, call Hale Windows Woodland Hills before adjusting anything. A pivot door is not a DIY adjustment project, and small problems caught early stay small. Reach us at (831) 618-2053.

Get a Quote – VLX 100 Pivot Door in Woodland Hills

If you’re planning an entry replacement in Woodland Hills and the VLX 100 is on your list, call Hale Windows Woodland Hills at (831) 618-2053. We’ll schedule a free on-site measurement, walk you through finish and glass options, and give you a written line-item quote before you commit to anything. No vague estimates, no pressure. Talk to an installer who actually sets these doors, not a call center.

Written by the team at Hale Windows Woodland Hills, your authorized ViewLux installation partner serving Woodland Hills, CA.