New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Woodland Hills pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Front Door Replacement Across Bel Air
Front door replacement in Bel Air typically runs $4,200 – $18,500 depending on whether you’re preserving an original 1950s steel frame or ordering a fully custom solid hardwood entry system. Most estate jobs in Bel Air take 10 – 16 weeks from order to installation, driven almost entirely by custom millwork lead times rather than labor on site. We’ve worked on enough Stone Canyon, East Gate, and Bel Air Crest properties to know the hillside ordinance rules before we touch the opening. Call (831) 618-2053 and we’ll put a written price in your hands before anything gets ordered.
Why Hale Windows Woodland Hills Is Bel Air’s Preferred Front Door Replacement Company
We’ve earned a strong reputation across Bel Air because we treat every estate door as a millwork project, not a swap-out. Homeowners on Stradella Road and Chalon Road call us when they need a door that matches a 1960s profile, clears the hillside ordinance, and holds up to Santa Ana winds. Crews are dispatched from our Los Angeles office and reach Bel Air properties directly, so you’re not waiting on a crew coming from the Valley floor during rush hour.
Every technician who walks onto your Bel Air property has gone through the Threshold Standard: background-checked, identity-verified, photo-badged, and pre-announced by name and photo before the visit. You’ll know exactly who is at the door before you open it. That matters on an estate where the door itself might be fifteen feet from the gate and you’re letting someone into your home.
We’re led by Spencer Odell, and the work is backed by the 365-Day Done Right Promise. If the door isn’t right, we make it right. No argument needed. That’s written on every contract we leave in Bel Air.
Exterior Door Replacement in Bel Air
Exterior Door Replacement in Bel Air means removing a failing or outdated entry door system and installing a new door, frame, hardware, and weatherstripping as a matched assembly. On Bel Air estates, this work frequently involves a door that has warped, delaminated, or lost its fire-rating after decades of hot, dry summers. A standard exterior door replacement in Bel Air runs $3,800 – $9,500, while a custom oversized entry system with sidelights runs $8,000 – $18,500.
Door And Frame Assembly
We replace the entire pre-hung unit when the original door and jamb have both failed. This is common on Bel Air homes from the 1950s through 1970s where the original steel door has rusted at the base and the jamb no longer seats evenly. We shim, level, and anchor the new assembly to current seismic standards so it stays square through wind events and foundation movement.
Hardware And Threshold Retrofit
Older Bel Air entry doors often have mortise locksets that aren’t compatible with modern fire-rated assemblies. We fit new multi-point locking hardware, replace worn thresholds, and add compression weatherstripping that survives the low-humidity heat Bel Air gets every summer.
New Front Door in Bel Air
A New Front Door in Bel Air is the right call when you’re changing the look, upgrading security, or moving to a fire-rated assembly on a hillside property. Most Bel Air homeowners choose this route when they want a door that looks like it was built with the house, even if it’s a modern fiberglass unit from Therma-Tru with a wood-grain finish. New front doors in Bel Air run $4,200 – $16,000 depending on size, material, glazing, and whether custom millwork matching is required.
Fire-Rated Assemblies For Hillside Homes
On brush-prone Bel Air hillsides, the door assembly matters as much as the door slab. We specify fire-rated frames, ember-resistant glazing, and intumescent seals where the city’s hillside ordinance requires them. A properly rated assembly can be the difference between an insurance adjustment and a denied claim after a wind event.
Custom Millwork Matching
When an estate has a bespoke door profile that the architect wants preserved, we order matched millwork from the original specifications or replicate it from field measurements. This adds lead time, usually 10 – 14 weeks, because the profile is cut to order rather than pulled from stock. The written price we give you before ordering already accounts for that millwork cost, so there’s no surprise line item halfway through.
Trusted Brands We Service in Bel Air
We install and service front doors from PGT, CGI, Therma-Tru, and ViewLux, which gives us the ability to match the right product to a Bel Air estate rather than pushing whatever is on the truck. For hillside homes near Stone Canyon Reservoir, we often specify PGT impact-rated doors with laminated glass that holds up to wind-driven debris. For mid-century estates where the original steel door needs to be preserved, we retrofit ViewLux or CGI assemblies into the existing frame. We keep local stock access for Bel Air customers, which means less waiting on parts when a door needs service mid-season. Our 365-Day Done Right Promise applies to every brand we install.
Common Front Door Replacement Problems We See in Bel Air Homes
- Original 1950s steel doors failing ember-resistance tests. Single-pane glass and unsealed frames let embers into the home during Santa Ana wind events. We see this on estates along Bel Air Road and the canyons that haven’t had a door upgrade since construction.
- Custom solid hardwood doors cracking and warping. Bel Air’s summer low humidity pulls moisture out of dense mahogany and oak doors, causing the slab to bow and bind against the jamb. Once a solid wood door warps, it rarely settles back square.
- Older door assemblies lacking seismic anchoring. Doors installed before current codes often have two or three screws holding the jamb to framing. On a hillside, that’s not enough. We add structural anchors when we replace the assembly.
- Frame rust-through at the threshold on original steel doors. Decades of irrigation overspray and winter rain collect at the base of older steel doors, rusting the frame until the door no longer seals. Ember entry through a rusted threshold is a real fire path on brush-prone lots.
Pricing for Front Door Replacement in Bel Air, CA
An exterior door replacement in Bel Air typically ranges from $3,800 to $9,500. A new front door on a custom estate home runs $4,200 to $18,500. What moves the number: door width and height (oversized estate doors cost more), whether you need a fire-rated assembly, the glazing package, and whether custom millwork matching is required. Emergency structural repairs to an existing opening add to the quote, but that line item is written before work starts, not after. You get a written price in your hands before anything is ordered. Call (831) 618-2053 for a free estimate and a fixed quote.
We Also Serve Cities Near Bel Air
Our Front Door Replacement team works across the Westside and the Valley. Beyond Bel Air, we regularly serve Woodland Hills, Tarzana, Sherman Oaks, and Calabasas. If your home is in one of these nearby cities and you’re looking for a specialist who understands estate doors and hillside rules, call us and we’ll put a written price in your hands before any work begins.
Serving Bel Air, CA - Our Local Coverage Area
We’re based in the Bel Air area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Front Door Replacement in Bel Air
If you keep the original 1950s frame and only replace the door slab and hardware, the city generally does not require a full hillside ordinance review because you’re not altering the opening size or structural assembly. Many Bel Air estates take this route to avoid triggering new inspections. We’ve retrofitted dozens of original steel and aluminum frames with modern dual-pane, impact-rated doors while leaving the frame in place. Call (831) 618-2053 and we’ll tell you whether your specific opening is likely to stay compliant.
Yes. We replicate the profile from field measurements and order a matched door slab that seats into the existing jamb. This is a common job on 1960s Bel Air estates where the original jamb is in good shape but the door itself has warped. The process adds 10 – 14 weeks of lead time because the millwork is cut to order, not stocked. The price for that custom match is written into your quote before we order.
Bel Air hillside homes in the Very High Fire Hazard Severity Zone are required to have an exterior door assembly rated to resist ember entry, which typically means a solid-core door or a steel or fiberglass door with a fire-rated frame, intumescent seals, and tempered or laminated glazing in any sidelight. Exact requirements depend on your specific location in the hillside zone and the year your home was built. We can assess your existing door against current standards and give you a written quote for the assembly that complies.
Order 12 – 16 weeks before you want the door installed. Custom estate doors in Bel Air almost always have a 10 – 14 week millwork lead time, and if your door needs impact-rated glazing from PGT or CGI, that can push closer to 16 weeks. The lead time is set by the millwork and glazing schedule, not by our crew’s availability. We’ll give you a firm lead time and a fixed written price before you place the order, so the calendar and the cost are both set in advance.
In many cases, yes. Insurers that cover Bel Air hillside properties often apply a discount or a mitigation credit when you install an impact-rated or fire-rated door assembly that meets current Wildland Urban Interface standards. The discount varies by carrier and policy, so we can’t promise a specific dollar figure. What we can do is install the assembly to the standard your insurer requires and give you the documentation you need to request the credit. Call (831) 618-2053 and we’ll help you get the spec right the first time.
One More Thing About Bel Air Doors
In Bel Air, we see the same pattern on dozens of original 1950s estates: floor-to-ceiling steel or aluminum sliding doors with single-pane glass still in place, and front entry doors that were custom-built to match those frames. When you replace the front door on one of these homes, the frame is often the only piece still worth keeping. We preserve it, retrofit the opening with a modern fire-rated door and laminated glazing, and keep the house out of the hillside ordinance review process entirely. That’s the kind of local knowledge you only get from crews who have actually worked these hillsides. We have.
On a steep Bel Air hillside estate near the Stone Canyon reservoir, our crew replaced a warped 1960s solid mahogany entry door with a custom Therma-Tru fiberglass door featuring a laminated glass interlayer and impact-rated glazing. We coordinated with the owner’s architect to match the original millwork profile, specified a low-E insulated glass unit for the sidelights, and pre-ordered the door with a 14-week lead time to keep the project on schedule before the Santa Ana wind season. The price was fixed in writing before we ordered a single component.
You’ll get the same approach on your home. We’ll send a background-checked, photo-badged technician to your door, put a written price in your hands before any work starts, and back the job with the 365-Day Done Right Promise. Call (831) 618-2053 to schedule your free estimate in Bel Air.
Written by Spencer Odell, Owner at Hale Windows Woodland Hills, serving Bel Air with front door replacement and exterior door installation.
Six Reasons Homeowners Choose Hale Windows Woodland Hills
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.