New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Woodland Hills pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Window Installation: The Woodland Hills Owner’s Guide
CGI window installation in Woodland Hills typically runs $850 to $2,400 per opening installed, depending on the CGI series, frame condition, and whether you’re replacing the glass, the sash, or the entire unit. We stock CGI-compatible hardware and glass packs on our trucks, and most single-unit replacement jobs are done in one visit. A window is only as good as the install behind it, and that’s where most Woodland Hills homeowners run into trouble: the frame shifts, the seal breaks, and suddenly a window that should last 25 years is fogged and binding by year eight.
Most people call us after they’ve noticed one of three things: a window that won’t close square, condensation trapped between the panes, or a crank or balance that fights back. By the time those symptoms show up, the underlying problem has usually been developing for a while. The good news is that CGI windows are built well enough that the fix is usually a specific part or a proper re-install, not a whole-house replacement.
Which CGI Models This Applies To
We work on the full CGI product range you’re likely to find in Woodland Hills homes: the Estate Collection, the Estate Entrances line, the Clarity Collection, and their impact-rated commercial storefront systems. The single most useful thing you can do before calling is find the CGI label. It’s usually a silver or white sticker on the inside frame edge of the sash, sometimes on the head jamb. The label will show the model series, the glass make-up (like laminated or insulated), and often a manufacturing date code. Having that info ready saves us a trip, and it means we arrive with the right parts on the first visit.
One compatibility gotcha we see regularly: CGI’s impact glass units are built to Miami-Dade and Florida Building Code standards, which is excellent for hurricane protection but means the glass packs are heavier and thicker than standard California replacement units. A sash that fits a standard 7/8-inch insulated glass unit won’t always accept a CGI laminated impact unit, and vice versa. If someone has swapped a sash or a glass pack with a non-CGI part in the past, that mismatch is often exactly why the window is failing now. We stock OEM CGI parts where available, and for older discontinued series we source quality aftermarket equivalents that match the original specs for thickness, weight, and hardware compatibility. Hale Windows Woodland Hills is an independent service provider, not affiliated with CGI, but we’ve been installing and repairing their products long enough to know which substitutions work and which ones will bite you.
Signs Your CGI Window Installation Is Failing
- The window binds or drags when you open or close it. In Woodland Hills we see this constantly on southwest-facing walls, where afternoon heat expands the frame and exposes a bad install. If the original installer didn’t leave proper clearance or shimmed the frame out of square, the window works fine in the morning and fights you by 4 p.m.
- Fog or condensation between the glass panes. This means the seal on the insulated glass unit has failed. Once moisture is inside the unit, the argon or krypton gas fill is gone, the low-E performance drops, and the glass needs replacement, not just a clean.
- Air leakage you can feel around the frame edges. On windy days off the Santa Monica Mountains, this shows up as a cold draft or a light whistle. The issue is usually improper flashing or missing backer rod around the rough opening, not the window itself. A re-install with proper sealing solves it.
- Water staining on drywall or trim below the window. This is the one to take seriously. A leak that shows below the window usually means water is getting in at the head or the sill and running down inside the wall cavity. It’s rarely the glass, and it’s almost always a flashing or pan issue from the original install.
- Crank operators or balance systems that grind, slip, or snap. CGI casement and awning hardware is built for coastal salt air, but Woodland Hills heat and dust still wear out nylon gears and torsion rods over time. If the crank spins without moving the sash, the operator is stripped, and forcing it will only damage the frame.
Replacement Cost & What’s Included
For Woodland Hills homeowners, here’s the honest range we quote on CGI window installation work:
- Glass pack replacement (seal failure): $350 to $750 per unit, depending on size and whether it’s insulated or laminated impact glass
- Sash replacement (frame or hardware damage confined to the sash): $500 to $1,100 per sash
- Full window replacement (frame-deep issues, re-install): $850 to $2,400 per opening, with higher-end impact-rated units at the top of that range
- Re-install of an existing window (flashing, square, and seal correction): $250 to $600 per window, assuming the window itself is healthy
Every one of those numbers is a written, line-item price you’ll have in your hands before any work starts. That’s the standard we’ve worked under since 2009, and it’s one of the reasons people in Woodland Hills call us instead of gambling on whoever knocks on the door. The labor includes removal and disposal of the old unit, proper flashing, insulation, interior and exterior trim as needed, and a full clean-out of the work area. Every window install carries the 365-Day Done Right Promise: if it’s not right, we make it right, no argument needed.
DIY or Call Us?
There are a few things an owner can safely check before calling. You can look at the CGI label I mentioned, take photos of the window from inside and out, and note when the problem happens: always, only in heat, only when windy. That information genuinely helps us diagnose faster and often saves you money on the service call. What you should not do is attempt to remove a CGI impact-rated sash or glass pack yourself. These units are heavy, often 25 to 45 pounds for a single sash, and the laminated glass doesn’t break clean like regular glass; it cracks but holds together in a sharp, rigid sheet that can cause a serious laceration if it shifts while you’re holding it. We’ve also pulled more than a few frames where a homeowner’s earlier repair attempt with off-the-shelf hardware or the wrong caulk created a worse problem than the original one. If the window is binding, leaking, or fogged, call us at (831) 618-2053 and let us look before you lift a ladder.
FAQs
A properly installed CGI window should give you 20 to 30 years of service, with the glass seal typically rated for 10 to 20 years depending on exposure. Woodland Hills’ combination of intense summer heat and cool winters stresses seals and frame tapes harder than coastal conditions, so Seal failure at year 12 or 15 is not unusual on unshaded south and west walls. If the window is failing structurally before year 10, the install is usually the culprit. Call us at (831) 618-2053 and we’ll tell you what you’re actually looking at.
It depends on where the failure is. Stripped crank operators, worn balances, and failed seals can be repaired or swapped without replacing the entire window. Frame rot, a warped sash, or a window that’s been shimmed badly from day one usually means a new unit is the smarter money. We’ll always tell you which one applies to your situation and quote both options when both are viable. Estimates are free.
Most single-window jobs in Woodland Hills are completed in one visit of two to four hours. We arrive with the parts matched, the trim and flashing materials already staged, and a written price already in your hands, so there’s no discovery process happening at your front door. Multi-window replacement runs longer, usually one to two days depending on the number of openings. Call (831) 618-2053 for a timeline on your specific project.
We stock the most common CGI hardware, glass packs, and seal components for the Estate and Clarity lines on our service trucks, which means many Woodland Hills calls are handled as a single-visit fix. For less common series or larger impact units, we order the part and schedule the install once it’s in hand, usually within three to five business days. If you have your CGI label info when you call, we can often confirm part availability before we ever roll the truck.
Get a Straight Answer on Your CGI Window in Woodland Hills
If your CGI window is fogged, binding, leaking, or just not closing the way it used to, call Hale Windows Woodland Hills at (831) 618-2053. Spencer Odell grew up in Los Angeles and has spent the better part of two decades measuring, fitting, and finishing windows across the San Fernando Valley, including plenty of jobs on streets just off Topanga Canyon Boulevard. A live person answers the phone 24 hours a day, and every technician who comes to your door is background-checked, identity-verified, photo-badged, and pre-announced by name and photo before the visit. You’ll get a written price before any work begins, a written guarantee on every repair, and the 365-Day Done Right Promise standing behind the job. We also service PGT, CWS, and ES Windows products. Call (831) 618-2053 for your free estimate.
Written by Spencer Odell, Owner, Hale Windows Woodland Hills at Hale Windows Woodland Hills, serving Woodland Hills and nearby areas.
Six Reasons Homeowners Choose Hale Windows Woodland Hills
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.