New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Woodland Hills pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ES Windows Sliding & Patio Doors: The Woodland Hills Owner’s Guide
If your ES Windows sliding or patio door is sticking, dragging, leaking air, or the rollers have ground themselves into dust, we stock the parts for it and we’re in Woodland Hills weekly. Most ES Windows sliding door repairs run between $220 and $650 installed, depending on whether we’re replacing rollers, a track, weatherstripping, or the full panel assembly. Here’s how it usually goes: the door worked fine for years, then one morning it takes two hands and a hip-check to move, and by that afternoon you’re looking for answers online.
Spencer Odell has pulled plenty of ES Windows panels out of Woodland Hills homes, and the failure pattern is predictable. It’s rarely the glass. It’s almost always the hardware underneath performing in ways the original design never anticipated, especially after ten or fifteen years of San Fernando Valley dust and dry heat.
Which ES Windows Models This Applies To
ES Windows builds their sliding and patio door lines in several series, most commonly the ES7000, ES8000, and the heavier ES9000 multi-slide systems. The gotcha for parts matching: ES Windows has changed roller and track profiles between production runs over the years, so a roller that fits a 2012 ES7000 will not necessarily seat properly in a 2018 ES7000. We identify the exact part by measuring the roller diameter, the track throat width, and the panel weight rating, then matching those numbers against the ES Windows hardware matrix we keep in the truck.
On OEM versus aftermarket: ES Windows factory rollers are stainless steel bearing units that hold up well, but for track systems and weatherstripping there are aftermarket equivalents made to tighter tolerances than what the factory shipped a decade ago. We’ll tell you when OEM matters and when a better made aftermarket part does the same job for less. Hale Windows & Doors is an independent service provider, not affiliated with ES Windows, which means we’re free to recommend the part that actually works rather than the one with the right logo.
If you have another brand on the house, we stock and service parts for PGT, CGI, and CWS as well. But for Woodland Hills ES Windows doors specifically, the parts problem is nearly always hardware, not glass.
Signs Your ES Windows Sliding & Patio Doors Is Failing
- The door needs muscle to slide. This usually means the rollers have worn flat or the bearings have seized. In Woodland Hills, the fine dust that blows off the hills gets into the roller track and acts like sandpaper on the bearing seals. Once the seal goes, the bearing grinds itself down within months.
- A grinding or scraping sound when you open and close it. That’s metal-on-metal contact. The roller wheel has likely lost its nylon coating and is now carving a groove into the aluminum track. Every open and close is making the repair more expensive.
- The door drops when you lift the handle. The rollers are adjustable, and if the adjustment screws have stripped or corroded, the panel sags. That sag puts pressure on the lock mechanism and the weatherstripping, and eventually the door won’t latch at all.
- You can see daylight or feel air moving around the closed door. The weatherstripping and the interlock at the meeting stile have degraded. In a Woodland Hills summer, that gap is air-conditioned air leaving your house, and in winter it’s the cold from the hills coming in.
- The door is harder to lock, or it won’t lock at all. A misaligned panel won’t seat the lock bolt into the jamb. People sometimes force the handle, which bends the lock mechanism, which then becomes a second repair on top of the roller job. When the lock goes, it’s a security issue, not just an inconvenience.
Replacement Cost & What’s Included
Here’s what you should expect to pay for ES Windows sliding and patio door work in Woodland Hills, parts and labor included:
- Roller replacement (2 rollers per panel): $220 – $420. Includes removing the panel, cleaning the track, installing new rollers, and adjusting for smooth operation.
- Track replacement: $380 – $650. This is when the aluminum track has a groove cut into it from worn rollers. The more severe the groove, the higher the labor.
- Full weatherstripping and interlock seal replacement: $180 – $350. Makes the door seal properly against Woodland Hills wind and dust.
- Complete panel hardware overhaul (rollers, track, seals, lock alignment): $550 – $900. This is the one that makes a 15-year-old door feel new again.
Every quote comes in writing before we start, so you’ll know the exact number before any work begins. If a repair fails, we come back and fix it free. Every job is covered under our 365-Day Done Right Promise: if it’s not done right, we make it right, no argument needed.
Two things drive the range: the specific roller profile your ES Windows door uses, and how much track damage has already been done. A door caught early usually lands at the bottom of that range. A door that’s been grinding for two years usually lands at the top.
DIY or Call Us?
This is the part where I’d normally warn you about high-tension springs, but sliding and patio door repair is a different animal. Working with glass door panels weighing 100 to 200 pounds is where DIY goes wrong fast. If you’re not used to lifting, supporting, and maneuvering a heavy glass panel, the risk isn’t just to the door – it’s to your back, your fingers, and the tile floor under the door. Sliding door panels are not dangerous because of high-tension mechanisms. They’re dangerous because they’re heavy and awkward, and a dropped panel shatters into a thousand pieces.
What you can safely check: look at the bottom edge of the door with a flashlight. If you see metal shavings or a groove worn into the track, you’ve confirmed the rollers are shot. That’s your diagnosis. The repair itself is a two-person job with the right tools, and it’s one of the most common calls we make in Woodland Hills. Call (831) 618-2053 and we’ll give you a straight answer on what it’ll take. If it’s a quick roller swap, we’ll tell you that up front.
FAQs
Most ES Windows rollers last 8 to 15 years in Woodland Hills depending on exposure to dust, how often the door is used, and whether the track was kept clean. Doors that face open hillsides and catch more airborne grit tend to wear rollers faster. If your door is approaching a decade old and getting harder to move, the rollers are near the end of their service life. Call (831) 618-2053 and we’ll confirm it before you spend a dollar.
In most cases, yes. The failure is typically in the rollers, track, or seals, all of which are repairable without replacing the glass or the panel. We replace panels only when the frame is bent, the glass is compromised, or the aluminum has corroded to the point that a repair wouldn’t hold. We’ll show you the condition of what we pulled out so you can decide with your eyes, not our word.
A roller replacement on an ES Windows sliding door typically takes 60 to 90 minutes. Track replacement can run two to three hours. We carry the common ES Windows roller profiles and track hardware on the truck, so most Woodland Hills repairs are done in a single visit. If we need to order a specific part, we’ll tell you before scheduling.
We stock the most common ES Windows rollers, track profiles, and weatherstripping for the ES7000, ES8000, and ES9000 series. For less common hardware or older production runs, we order from our supplier network, which usually adds two to four business days. Before we schedule the visit, you’ll know whether your part is on the truck or on order.
No. You get a written price before we start, and that’s the price. If we open the panel and find something we couldn’t see from the outside, we’ll stop and tell you before any additional work is done. No surprises on the invoice, on any job, ever. That’s the way Spencer Odell has run it since day one, because a window is only as good as the install behind it.
Get Your ES Windows Sliding Door Working Right Again
If your ES Windows sliding or patio door is sticking, grinding, leaking air, or won’t lock, we’ll get it working like it should. You’ll get a written price before any work starts, a technician who is background-checked, identity-verified, and photo-badged, sent to you by name and photo before the visit, and a repair backed by our 365-Day Done Right Promise. Call (831) 618-2053 to schedule your free estimate in Woodland Hills.
Written by Spencer Odell, Owner, Hale Windows Woodland Hills at Hale Windows Woodland Hills, serving Woodland Hills and nearby areas.
Six Reasons Homeowners Choose Hale Windows Woodland Hills
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.