New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Woodland Hills pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Therma-Tru Window Installation: The Woodland Hills Owner’s Guide
Therma-Tru window installation in Woodland Hills typically runs $400 to $1,100 per opening when replacing an existing unit with a Therma-Tru-compatible window, including labor, flashing, sealant, and cleanup. Most owners discover a problem the same way: a window that suddenly won’t latch, a draft that appears every January, or glass fog between panes that won’t wipe clean. We stock common Therma-Tru hardware and seals on our trucks, so most single-window jobs finish the same day we arrive.
The honest truth about Therma-Tru is this: they’re known for doors, and their window lines tend to be regional or paired with specific door packages. That means owners often have a Therma-Tru window installed during a remodel or new build and later can’t find anyone who actually knows the product. Spencer Odell has pulled enough of these frames in Woodland Hills homes off Topanga Canyon Boulevard to tell you exactly what holds up and what doesn’t in this climate.
Which Therma-Tru Models This Applies To
Therma-Tru’s window catalog is smaller than their door lineup, but it matters which series you have. The compatible lines we see most often in Woodland Hills include their vinyl replacement windows, their patio door sidelight and transom kits, and windows paired with Therma-Tru entry systems in newer construction. Here’s the gotcha: Therma-Tru windows use proprietary hinge and latch hardware on casement and awning units, and generic hardware-store replacements almost never line up with the screw bosses. Measure the hinge spacing before buying anything. If the label on the frame edge says “Therma-Tru” and has a serial number, we can usually match the hardware by that number alone.
OEM parts are the safe choice for anything involving the latch, hinge, or weatherstripping profile. But for glass replacement, a quality insulated unit from a local glazing shop often performs identically at 30-40% less than a factory replacement. We’ll be straight with you about which route makes sense for your specific window. Hale Windows Woodland Hills is an independent service provider, not affiliated with Therma-Tru, but we’ve worked on enough of their products to know the parts and the quirks.
Signs Your Therma-Tru Window Installation Is Failing
- Draft you can feel around the frame edges. The weatherstripping on Therma-Tru windows uses a specific T-slot profile. When it flattens from Woodland Hills sun exposure, air moves through. Replacing the strip usually fixes it in under an hour.
- Window won’t latch or close fully. The locking hardware on these windows wears at the strike plate. If you have to lift or pull the sash to engage the lock, the hinges or keeper are done and the window isn’t sealing properly.
- Fog between glass panes. The insulated glass unit’s seal has failed. Nothing you wipe on the surface will help. The fix is a new IGU, not a new window frame, unless the frame itself is cracked or warped.
- Sash feels heavy or drops when opened. The balance system inside the frame is wearing out. On Therma-Tru double-hung units, this is usually a coil balance issue. Left alone, the sash can slam and crack the frame corner.
- Visible daylight through a closed corner joint. The frame has shifted or the corner weld has separated. In Woodland Hills, the summer-to-winter temperature swing puts real stress on vinyl frame corners. This one usually means a new frame.
Replacement Cost & What’s Included
Here’s what Therma-Tru window installation runs in Woodland Hills, based on the jobs we’ve done across the area:
- Hardware or weatherstrip replacement: $140 to $325, including the part and labor. Most of these are same-visit fixes because we carry common Therma-Tru profiles on the truck.
- Insulated glass unit replacement: $325 to $700 per sash, depending on glass size and whether you need low-E or standard clear. The low-E coating (a thin layer that blocks heat while letting light through) adds about $80 to $150 per unit but pays for itself in Woodland Hills summer cooling bills.
- Full window replacement with Therma-Tru-compatible unit: $650 to $1,100 per opening, including the new window, installation, exterior trim work where needed, flashing, and haul-away of the old unit.
Every quote is a written, line-item price before any work starts. No change orders, no surprise balance at the end. If the installation isn’t right, the 365-Day Done Right Promise means we come back and make it right, no argument needed. And every repair carries a written guarantee; if the fix fails, a second visit is free.
DIY or Call Us?
You can safely check a few things yourself: try cleaning the weatherstripping tracks with a soft brush, inspect the latch alignment, and look for cracked caulking around the exterior frame. Those checks won’t hurt anything and might tell you exactly what’s wrong. But once you’re dealing with spring-loaded balances, glass removal, or a frame that’s out of square, call someone who does this daily. A window is only as good as the install behind it, and a dropped sash or a broken IGU in your hand is a bad afternoon. If you’re anywhere near Woodland Hills, call (831) 618-2053 and we’ll walk you through what we’re seeing over the phone. The estimate is free.
FAQs
In the Woodland Hills climate, expect 15 to 25 years from the frame and 10 to 15 years from the insulated glass seals. Sun exposure on south- and west-facing walls shortens glass seal life significantly. If your windows are past year 12 and you’re seeing fog or drafts, the repairs are usually still worth doing. Call (831) 618-2053 for an honest assessment and a free estimate.
Yes, in most cases. If the frame is square and not cracked, we can replace the hardware, weatherstripping, balances, or the glass unit itself. Full replacement is only the right call when the frame is warped, a corner weld has failed, or the window was installed poorly in the first place. We’ll tell you straight which one you’re looking at before any money changes hands.
A single window replacement in Woodland Hills usually takes 2 to 4 hours from start to finish, including interior trim touch-up and cleanup. Hardware swaps or glass unit replacements are typically 60 to 90 minutes per window. We’ll give you a clear time window before we arrive and the name and photo of your technician beforehand.
We keep common Therma-Tru weatherstripping profiles, latch sets, hinge components, and coil balances on our trucks for Woodland Hills jobs. For less common parts or specific glass sizes, we source them from our supplier network in the Valley, usually arriving in 2 to 4 business days. Hale Windows Woodland Hills also carries parts for PGT, CGI, and CWS window lines if you have mixed brands in your home.
Ready to get your Therma-Tru window working right? Call (831) 618-2053 and we’ll set up a free estimate. You’ll know exactly who’s coming to your door before the truck pulls up, and the price will be in writing before any work begins.
Written by Spencer Odell, Owner, Hale Windows Woodland Hills at Hale Windows Woodland Hills, serving Woodland Hills and nearby areas.
Six Reasons Homeowners Choose Hale Windows Woodland Hills
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.